| BW GAS ALERT MICROCLIP XT
multi gas monitor
| Select from - H²S, CO, O² & LEL
| Fully Serviceable
The slim and compact GasAlertMicroClip XT provides affordable protection from atmospheric hazards .
This multi-gas detector offers continuous visual confirmation of detector operation and compliance with the IntelliFlash feature and simple one-button operation offers ultimate ease of use and significantly reduces time spent training the user.
The GasAlertMicroClip XT's slim and compact design makes it one of the smallest multi gas monitors available making it easy to wear and allowing workers to focus on the job at hand without feeling weighed down.
Calibration is required only two times per year with a simple one-button automatic procedure .
The unit recharges in less than four hours and is powered by a lithium polymer battery .
The GasAlertMicroClip XT features a built-in concussion-proof boot plus an IP67 rating ensures dust and water resistance .
Guarantee an accurate record of a user’s day with 16 hours of standard datalogging and event logging of up to ten events .
All these features and benefits add to a monitor that not only keeps workers safe and compliant but also lowers the overall cost of ownership .
The BW GasAlertMicroClip XT advanced microprocessor performs a full function self-test automatically on startup and on demand to verify sensor, circuit and battery integrity, as well as audible/visual alarm operation.
Generating a permanent record of gas alarm events has never been easier. This detector allows for effortless transmission of stored event data to a cordless printer or a PC for review and analysis via an optional IR data link cable or used in conjunction with the microdock system.
Despite being loaded with features, the GasAlertMicroClip XT is compact and light, which makes it comfortable to wear. Clip it to your lapel, pocket, belt or hardhat for unequalled protection.
Detects up to four hazards including H2S, CO, O2 and combustibles
Continuous LCD shows real-time gas concentrations, alarm setpoints
and exposure limits.
Bright wide-angled visual alarm bars
IntelliFlash verifies operation and compliance to both the user and supervisor
Rugged, IP-66/67 highly water-resistant design
Built-in concussion-proof boot
MicroDock II compatible for easy calibration, test and record storage
Automatic event logging records 10 most recent alarm events that can be downloaded
via built-in IR COM port to a printer, computer or MicroDock II docking station module
Two alarm levels (Low / High)
Provides typical 95 dB tone and bright, quad-LED indication on alarm
Internal vibrator alarm
Compact (4.4 x 2.4 x 1.1 in. / 11.3 x 6.0 x 2.9 cm) and lightweight (6 oz. / 171 g)
Powered by a rechargeable battery
Full-function self-test of audible/visual alarms, plus integrity of sensor, battery and
Comes complete with rugged, stainless-steel alligator belt clip and test cap
Instructions in local languages included
Listed below are the gas sensors that can be selected for this model. The alarm setpoints are the factory defaults however if you need these modified for your particular application we can change these for you free of charge.
0-100% LEL / 0-5.0% v/v.
0-30.0% by vol.
Low alarm level
30 ppm ppm (UK/EU)
|High alarm level
|Rugged composite material with integral concussion-proof boot
|5% to 95% RH (non-condensing)
|Complies with EMC Directive 2004/108/EC
|Lithium Polymer - Rechargeable
|No - User can switch off when not in use
|Activation, self-test and alarm event data transmission
|Full functional self-test
|Verifies integrity of sensor, circuitry, battery and audible/visual alarms
|Electrochemical cell (temperature compensated)
|10 hours typical - Recharges in less than 4 hours
|Indicators & Alarms
|Flashing, wide-angled alarm lens with red quad-LEDs, plus Green IntelliFlash LED to show unit is functioning correctly
|Pulsing, high-output siren at 95 dB (typical) at 1 ft. (0.3 m) plus user can select an audiable indication that unit is functioning correctly.
|End of life (audible/visual/vibration)
|Continuously displayed in months, then days, then hours
|Two alarm levels
|LOW alarm / HIGH alarm / TWA / STEL / OL (over limit)
|Peak alarm exposure
|Records TWA & STEL levels
|High and low (displayed on demand in ppm or %)
|Advises to “TEST” and that self-test was passed
|Full function self-test
|On activation and on demand
|Records and transmits up to 10 gas alarm events
|Gas type, peak exposure level (ppm or %); alarm duration in minutes and seconds;
time elapsed since the alarm occurred in days, hours and minutes, life remaining, self-tests, cumulative alarm time
|Via infrared port to infrared printer or to USB PC adapter
|4.4x2.4x1.1 inches / 11.3x6.0x2.9 cm
|2 years including all sensors
your shipment will include:
1 no. BW GasAlertMicroClip XT
1 no. Battery Charger
1 no. Calibration Cap
1 no. Instruction Sheet
1 no. Calibration Certificate
1 no. 24 Month Warranty
1 no. Comprehensive BW Dealer Technical Advice & Support